VANCOUVER, BC / ACCESSWIRE / October 8, 2019 / BeMetals Corp. ('BeMetals' or the 'Company') (TSX-V:BMET) (OTCQB:BMTLF) is pleased to announce the first batch of borehole analytical drill results from its underground drill program at the Company's high-grade South Mountain Zinc-Silver Project ('South Mountain' or the 'Project') in southwestern Idaho, U.S.A. This batch of recently received results represents sampling of boreholes; SM19-003, SM19-005 and SM19-006 (See Figures 1 & 2). The drilling program is ongoing with further mineralized zones from other boreholes under geological logging, sampling and laboratory analysis. Further batches of borehole analytical results will be released as they become available.

DRILLING HIGHLIGHTS:

• Borehole SM19-006: intersected 15.70 metres grading 21.27% Zinc ('Zn'), 147 grams per tonne ('g/t') Silver ('Ag'), 8.04 g/t Gold ('Au'), 0.77% Lead ('Pb'), and 0.30% Copper ('Cu')

• Borehole SM19-005: intersected 11.23 metres grading 7.97% Zn, 128 g/t Ag, 1.20 g/t Au, 0.91% Pb, and 0.24% Cu

• Borehole SM19-003: intersected 24.17 metres grading 11.12% Zn, 267 g/t Ag, 3.44 g/t Au, 3.75% Pb, and 0.29% Cu

• Including: 9.60 metres grading 11.74% Zn, 437 g/t Ag, 5.99 g/t Au, 8.68% Pb, & 0.38% Cu
• Including: 13.26 metres grading 11.77% Zn, 169 g/t Ag, 1.88 g/t Au, 0.54% Pb, & 0.25% Cu

Note: ALS Global completed the analytical work with the core samples processed at their preparation facility in Reno, Nevada, U.S.A. All analytical and assay procedures are conducted in the ALS laboratory in North Vancouver, BC. Reported widths are drilled core lengths as true widths are unknown at this time. It is estimated based upon current data that true widths might range between 60-80% of the drilled intersection. Intervals and included intervals cut offs are based upon visual contacts of massive sulphide units with no more than 1.35m of internal dilution.

John Wilton, President, CEO and Director of BeMetals stated, 'We are pleased with this first batch of underground borehole results. They support the significant high-grade nature of the deposit, and again show the robust grades in both silver and gold associated with the base metal mineralization. Notably these results relate to boreholes drilled both above (SM19-006) and below (SM19-003/005) the Sonneman level adit in an extensive area of mineralization known as the DMEA zone (See Figure 2). This illustrates the up and down plunge potential to extend the mineralized bodies that form the deposit with further drilling to expand the high-grade resource base during future work plans.

The contacts of the massive sulphide bodies generally provide a clear visual boundary to the high-grade mineralization into either marble or skarn units. This could provide an important effective marker to guide any future mining of the deposit and limit dilution of the high-grade material.

The phase 1 drilling program is progressing well towards the goals of testing the drilling strategy and targeting from the existing underground infrastructure. It is also identifying areas of potential extensions to the mineralization.'

CURRENT PHASE 1 DRILLING AT SOUTH MOUNTAIN PROJECT

The principal objective of the ongoing drill program at South Mountain is to test potential extensions to the mineralized zones and confirm the grade distribution of the current polymetallic mineral resource estimate. To date, the Company has completed 11 underground boreholes for a total of approximately 1,060 metres of this 2,500-metre program. Table 1 below shows the results received from; SM19-003, 005 and 006. Table 2 provides the drill hole co-ordinates, azimuth and dip.

Boreholes SM19-003, 005 and 006 returned significant intersections of massive sulphide comprised predominantly of pyrrhotite, sphalerite, galena, arsenopyrite and chalcopyrite. The massive sulphide intersections and grade intervals are depicted on Figures 1 & 2. These massive sulphides generally appear hosted within the marble but in some cases are also in contact with skarn units in the DMEA area (See figure 2). The massive sulphide zones have sharp contacts into the host units. Borehole SM19-004 intersected mostly skarn and marble units with an approximately 2.40 metre wide interval of massive sulphides that has not yet been sampled.

Table 1. SM19-003 to SM19-006 Drill Holes: Analytical and Assay Results

Note: Reported widths are drilled core lengths as true widths are unknown at this time. It is estimated based upon current data that true widths might range between 60-80% of the drilled intersection. Intervals and included intervals cut offs are based upon visual contacts of massive sulphide units with no more than 1.35m of internal dilution. (Note: See details below in QA/QC section).

Figure 1: Plan View of the Sonneman & Laxey Levels, South Mountain Deposit, showing locations of rib-sampling, priority target zones, planned boreholes, and completed borehole results; SM19-003,004,005 & 006 (SM19-002 previously reported)

Figure 2: 3D Perspective View looking north-north-east, showing locations of rib-sampling, priority target zones, and completed borehole results SM19-003,004,005 & 006, (SM19-002 previously reported)

Table 2: Drill Hole Azimuth, Dip and Collar Co-ordinates

QUALITY ASSURANCE AND QUALITY CONTROL PROCEDURES

The project employs a rigorous QC/QA program that includes; blanks, duplicates and appropriate certified standard reference material. All samples are introduced into the sample stream prior to sample handling/crushing to monitor analytical accuracy and precision. The insertion rate for the combined QA/QC samples is 10 percent or more depending upon batch sizes. ALS Global completed the analytical work with the core samples processed at their preparation facility in Reno, Nevada, U.S.A. All analytical and assay procedures are conducted in the ALS facility in North Vancouver, BC. The samples are processed by the following methods as appropriate to determine the grades; Au-AA23-Au 30g fire assay with AA finish, ME-ICP61-33 element four acid digest with ICP-AES finish, ME-OG62-ore grade elements, four acid with ICP-AES finish, Pb-OG62-ore grade Pb, four acid with ICP-AES finish, Zn-OG62-ore grade Zn, four acid digest with ICP-AES finish, Ag-GRA21-Ag 30g fire assay with gravimetric finish.

The technical information in this news release for BeMetals, has been reviewed and approved by John Wilton, CGeol FGS, CEO and President of BeMetals, and a 'Qualified Person' as defined under National Instrument 43-101.

THE SOUTH MOUNTAIN PROJECT

South Mountain is a polymetallic development project focused on high-grade zinc and is located approximately 70 miles southwest of Boise, Idaho (see Figure 3). The Project was intermittently mined from the late 1800s to the late 1960's and its existing underground workings remain intact and well maintained. Historic production at the Project has largely come from high-grade massive sulphide bodies that remain open at depth and along strike. According to historical smelter records, approximately 53,642 tons of mineralized material has been mined to date. These records also indicate average grades; 14.5% Zn, 363.42 g/t Ag, 1.98 g/t Au, 2.4% Pb, and 1.4% Cu were realised. Thunder Mountain Gold Inc. purchased and advanced the project from 2007 through 2019, with expenditures into the project of approximately US$12M. The current mineral resource estimate of the deposit is detailed in Table 3 below and the Company expects to provide a revised mineral resource update following a phase 2 drilling program in 2020.

The Project is largely on and surrounded by private surface land, and as such, the permitting and environmental aspects of the Project are expected to be straightforward. Permits are in place for underground exploration activities and BeMetals does not anticipate significant barriers to any future development at the Project.

Figure 3: Project Location Map

Table 3. NI 43-101 Mineral Resource Statement for the South Mountain Project - April 1, 2019

Mineral Resources at 6.04% ZnEq Cut-off

Classification

Zinc Equivalent Resource

Contained Metal

Short Tons

ZnEq lbs

ZnEq %

Zn lbs

Zn%

Ag oz

Ag opt (g/t)

Au oz

Au opt (g/t)

Pb lbs

Pb %

Cu lbs

Cu %

x1000

x1000

x1000

x1000

x1000

x1000

x1000

Measured

63.2

22,200

17.57

14,700

11.64

237

3.745 (116 g/t)

4.0

0.063 (1.96 g/t)

600

0.483

700

0.566

Share article: Shares Share Tweet Share Flip Email Watch latest videos Subscribe and Follow Get a daily dose of Tennessee Daily news through our daily email, its complimentary and keeps you fully up to date with world and business news as well. Subscribe Now News RELEASES Publish news of your business, community or sports group, personnel appointments, major event and more by submitting a news release to Tennessee Daily. More Information null in null Business Section FedEx, UPS step up as Canada Post loses market share in strikes OTTAWA, Canada: With Canada Post struggling to maintain operations amid labour unrest, rivals like FedEx and UPS are stepping in to... U.S. stocks steady Tuesday despite tariffs turmoil NEW YORK, New York - U.S. and global markets showed a mixed performance in Tuesday's trading session, with some indices edging higher... Beijing blamed for covert disinformation on French fighter jet Rafale PARIS, France: French military and intelligence officials have accused China of orchestrating a covert campaign to damage the reputation... Birkenstock steps up legal battle over fakes in India NEW DELHI, India: Birkenstock is stepping up its efforts to protect its iconic sandals in India, as local legal representatives conducted... Beijing hits back at EU with medical device import curbs HONG KONG: China has fired back at the European Union in an escalating trade dispute by imposing new restrictions on medical device... Wall Street reels after Trump invokes new tariffs NEW YORK, New York - Monday's trading session saw mixed performances across U.S. and global markets, with several major indices posting... US Section Thousands gather in Himalayas as Dalai Lama celebrates 90th birthday DHARAMSHALA, India: The Dalai Lama turned 90 on July 6, celebrated by thousands of followers in the Himalayan town of Dharamshala,... U.S. Treasury Secretary says Musk should steer clear of politics WASHINGTON, D.C.: Elon Musk's entry into the political arena is drawing pushback from top U.S. officials and investors, as his decision... TikTok building U.S.-only app amid pressure to finalise sale CULVER CITY, California: TikTok is preparing to roll out a separate version of its app for U.S. users, as efforts to secure a sale... Trump defends use of 'Shylock,' citing ignorance of slur WASHINGTON, D.C.: President Donald Trump claimed he was unaware that the term shylock is regarded as antisemitic when he used it in... Congress weighs Medicaid cuts, sparking alarm in small-town hospitals OMAHA, Nebraska: With Congress considering cuts totaling around US$1 trillion to Medicaid over the next decade, concerns are rising... Trump admin allows GE to restart engine sales to China’s COMAC WASHINGTON, D.C.: The U.S. government has granted GE Aerospace permission to resume jet engine shipments to China's COMAC, a person... Movie Review Taxi Driver [Blu-Ray]